Copyright 2021 Chembond Material Technologies. Website developed by LVS Space.
Threadlockers
Kem Vibra-TITE Threadlockers lock and seal threaded fasteners. Liquid Threadlockers are most effective method of locking threaded fasteners because they utilize the entire assembly. These Threadlockers alleviates rust lock and prevent leakages. They perform better than traditional mechanical devices such as lock washers, preventing any loosening from shock and vibration.
Anaerobic Threadlockers cure to form a hard lock when applied to a fastener and installed into a mating metal part. In the absence of air and the presence of metal, a chemical reaction takes places which causes the material to harden, unitizing the assembly. Anaerobic products are not recommended for use on plastic parts, especially thermoplastics, where stress cracking can occur, or in pure oxygen / oxygen rich environments which prevent the product from properly curing.
Low Strength
Threadlockers
Kem Vibra-TITE 111 Low Strength Threadlockers
Medium Strength Threadlockers
Kem Vibra-TITE 121 Medium Strength Threadlockers
MEDIUM STRENGTH
Kem Vibra-Tite 121 is a medium strength anaerobic threadlocker designed for locking threaded fasteners from 6 mm to 18 mm in diameter. Medium strength allows for disassembly with standard hand tools. Exhibits good temperature and solvent resistance. Used in applications where shock and vibration may cause the fasteners to loosen.
Kem Vibra-TITE 122 Oil Tolerant Threadlockers
OIL TOLERANT THREADLOCKERS
A medium strength, oil tolerant anaerobic threadlocker designed for locking threaded fasteners from 6 mm to 18 mm in diameter, that require disassemble with standard hand tools. Exhibits good temperature and solvent resistance.
Kem Vibra-TITE 150 Medium Strength – Wicking Grade Threadlockers
MEDIUM STRENGTH WICKING GRADE THREADLOCKERS
Kem Vibra-Tite 150 is a fast cure, low viscosity wicking anaerobic threadlocker designed to seek voids in assembled components and cure anaerobically. Can be used as a post assembly application to prevent the loosening of metal threaded fasteners.
High Strength
Threadlockers
Kem Vibra-TITE 131 Permanent Strength Threadlockers
Permanent Strength Threadlockers
Kem Vibra-Tite 131 is a high strength anaerobic threadlocker designed to permanently lock fasteners up to 25 mm in diameter. Exhibits good temperature and solvent resistance.
Kem Vibra-TITE 137 High Temperature / High Strength Threadlockers
High Temperature / High Strength Threadlockers
Kem Vibra-Tite 137 high temperature and high strength anaerobic threadlocker designed to permanently lock fasteners up to 38 mm in diameter. Joins threaded parts exposed to operating temperatures up to 230°C.
Kem Vibra-TITE 140 High Strength Threadlockers
High Strength Threadlockers
Kem Vibra-Tite 140 is a high strength anaerobic threadlocker designed to permanently lock fasteners. Exhibits good temperature and solvent resistance. Performs on aluminium, steel, plated, stainless steel, and special alloy parts. Locks and seals fasteners from up to 25 mm diameter
Kem Vibra-TITE 146 Large Diameter High Strength Threadlockers
Large Dia. High Strength Threadlockers
Kem Vibra-Tite 146 is a high strength, large diameter anaerobic threadlocker designed to permanently lock fasteners. Resists attack from lubricants and most industrial liquids and gases.
Kem Vibra-TITE 150 Medium Strength – Wicking Grade Threadlockers
MEDIUM STRENGTH WICKING GRADE THREADLOCKERS
Kem Vibra-Tite 150 is a fast cure, low viscosity wicking anaerobic threadlocker designed to seek voids in assembled components and cure anaerobically. Can be used as a post assembly application to prevent the loosening of metal threaded fasteners.
Removable And Reusable (VC-3) Threadmate
Removable And Reusable (VC-3) Threadmate
Kem Vibra-Tite VC-3 Threadmate is a powerful locking and sealing coating for threaded fasteners that works on the principle of “Friction through Viscosity”.
Kem Vibra-Tite VC-3 Threadmate utilizes a special blend of acrylic resins to prevent fasteners from loosening even under the stress of prolonged and extreme shock and vibration.
It resists leakage at the fastening point by acting as a dam between mated threads.