CYANOACRYLATES

Cyanoacrylates

Cyanoacrylates

Kem Vibra-TITE Cyanoacrylates, commonly referred to as superglues, are unique in their formulation. These single-part, crystal clear instant adhesives are designed for rapid polymerization, even at room temperature, leading to an extraordinary fast fixture strength. Their adhesive capabilities are initiated by the mere presence of water moisture on the surface of the object or by the addition of an accelerator product. This makes them incredibly versatile and accommodating to various environmental conditions.

They are particularly praised for their shock and impact-resistant properties, setting them apart from other common adhesives. Kem Vibra-TITE Cyanoacrylates have found widespread usage due to their versatility. They can be used for bonding circuit board wires, ceramics, fabric, metal, and leather. In addition, they serve a significant role in automotive industry for molding parts and tagging equipment. Even rubber pads for equipment bases or legs can be securely fastened using these impressive superglues.

Table listing Kemite adhesive products with details like viscosity, max gap fill, shear strength, temperature range, and specific gravity.
Two plastic bottles of Kem'TITE Instant SuperGlue, one large and one small, labeled with "300 HV" and "Medium Viscosity.

General Cyanoacrylate

Kem Vibra-TITE 301 Surface Insensitive

Kem Vibra-TITE301 is a low viscosity and medium velocity cyanoacrylate adhesive.Designed for wood, leather, rubber, plastics, fiberglass mat, etc.

 

Request a TDS
Two plastic bottles of Kem'TITE Instant SuperGlue, one large and one small, labeled with "300 HV" and "Medium Viscosity.
Request a TDS
Two bottles of Kem Tite Instant Super Glue, one large and one small, labeled "301-I" for cyanoacrylates, with blue and yellow labels.
Request a TDS

Fast Setting Cyanoacrylate

Kem Vibra-TITE 301 i Fast Setting

Kem Vibra-TITE301 is a low viscosity and medium velocity cyanoacrylate adhesive.Designed for wood, leather, rubber, plastics, fiberglass mat, etc.

Request a TDS
Two bottles of Kem Tite Instant Super Glue, a large one of 250g and a small one with medium viscosity and medium setting.

Medium Viscosity Medium Setting

Kem Vibra-TITE 302 medium viscosity, medium setting

Kem Vibra-TITE302 is a medium viscosity and medium setting velocity cyanoacrylate adhesive for use on pretreated metal to rubber parts, plastics, wood etc.

Request a TDS
Two bottles of Kem Tite Instant Super Glue, a large one of 250g and a small one with medium viscosity and medium setting.
Request a TDS
Two bottles of Kem-TITE Instant Super Glue, one large and one small, with blue tips and yellow labels showing 300 HV.
Request a TDS

Medium Viscosity Medium Setting

Kem Vibra-TITE 300 HV medium viscosity, medium setting

Kem Vibra-TITE 300 HV is a medium viscosity and medium setting velocity cyanoacrylate adhesive for bonding plastics, rubber, metal.

Request a TDS
Two bottles of Kem TITE Instant SuperGlue. The larger bottle is 250g, and the smaller bottle is for general-purpose use.

Low Viscosity, Fast Setting

Kem Vibra-TITE 303 low Odour & Low Bloom, Gap Filling Cyanoacrylate

Kem Vibra-TITE303 is a very low viscosity and very fast setting velocity cyanoacrylate adhesive that bonds Acidic, Insensitive surface with extremely fast setting time. No-odour and non-blooming characteristics make this product user friendly when vapor control is an issue.

Request a TDS
Two bottles of Kem TITE Instant SuperGlue. The larger bottle is 250g, and the smaller bottle is for general-purpose use.
Request a TDS
Two bottles of Kemi TITE Instant Super Glue, one large 250g and one small, both labeled "Cyanoacrylates 306.
Request a TDS

Surface Insensitive - Wicking

Kem Vibra-TITE 306 Surface Insensitive - Wicking Cyanoacrylate

Kem Vibra-TITE306 is a medium to low viscosity, fast setting velocity cyanoacrylate adhesive ideal for bonding preassembled parts, plastics, TPR Elastomers, difficult to bond rubber compounds like EPDM, nitrile, neoprene, viton, EVA, SBS rubber, ABS, plasticized & rigid PVC.

Request a TDS
Two bottles of Kem Tite Instant Super Glue, a 250g large bottle and a smaller bottle, both featuring yellow and blue labels.

Metal And Rubber Bonder (Medium)

Kem Vibra-TITE 315 Metal and Rubber Bonder (Medium)

Kem Vibra-TITE315 is a medium to low viscosity, medium setting velocity methyl based instant cyanoacrylate adhesive. It is ideal for bonding metal, rubber, plastic etc.

Request a TDS
Two bottles of Kem Tite Instant Super Glue, a 250g large bottle and a smaller bottle, both featuring yellow and blue labels.
Request a TDS

Rubber Toughened – Shock/temperature Resistant

Kem Vibra-TITE 380 Rubber Toughened Black

Kem Vibra-TITE380 is a black coloured, rubber toughened, Shock vibration, vibration resistant with medium setting time. Ideal for automotive rubber parts, loudspeaker voice coil, mounting electrical components, bonding auto bumper strips.

Request a TDS
Two bottles of Kemi Tite Instant Super Glue, one 250g and one smaller, labeled high viscosity and fast setting cyanoacrylates.

HVHT – Fast Setting

Kem Vibra-TITE 393 General Purpose Cyanoacrylates

Kem Vibra-TITE 393 is high viscosity, fast setting velocity ethyl Cyanoacrylates adhesive. It is suitable to bond EPDM rubber, metals, and plastic parts.

Request a TDS
Two bottles of Kemi Tite Instant Super Glue, one 250g and one smaller, labeled high viscosity and fast setting cyanoacrylates.
Request a TDS
Large and small bottles of Kem Tite Instant Super Glue with blue caps and yellow labels, containing cyanoacrylates.

Surface Insensitive – Medium Viscosity

Kem Vibra-TITE 395 General Purpose Cyanoacrylates

Kem Vibra-TITE395 is medium viscosity medium setting velocity ethyl Cyanoacrylates adhesive. It is suitable to bond EPDM rubber, metals, and plastic parts.

Request a TDS

UV CURE

Kem Vibra TITE UV Cure Adhesives with their innovative technology, offering a creative solution for bonding varied materials. When exposed to light, these adhesives go through a transformational curing process that sets them apart from traditional products. Their unique formulation allows them to bond robustly to most substrates, ensuring a secure and lasting connection. Furthermore, being single-part acrylates, they simplify the application process, reducing the chances of errors durin

Adhesive comparison: 215 - UV potting for glass/plastic, 3500 cP, -54 to 120°C; 230 - UV/heat for metals, 14,000-25,000 cP, -54 to 190°C.
Two bottles of Kem Vibra-TITE 215 UV adhesive; one 250ml, the other 50ml. Suitable for bonding glass to plastic, cures under UV light.

Bonding & Potting Light Cure Adhesive

Designed for UV potting and bonding glass to plastic substrates.

Request a TDS
Two bottles of Kem Vibra-TITE 215 UV adhesive; one 250ml, the other 50ml. Suitable for bonding glass to plastic, cures under UV light.
Request a TDS
Two bottles of Kem Vibra-TITE 230 UV Adhesive, a light-cure, impact-resistant bonding agent for metal, glass, and ceramic surfaces.

Impact Resistant Light Cure Adhesive

Cure either by UV, heat, or activator, designed for bonding metals, glass and ceramic materials.

Request a TDS